[. . . ] To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM XL-MP60 Micro Component System consisting of XL-MP60 (main unit), CP-MP60F (front speakers) and CP-MP60SW (subwoofer). MODEL XL-MP60 OPERATION MANUAL XL-MP60 SPECIAL NOTES Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] " If the disc compartment is stopped with force, the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during disc operation, move the unit away from it. " If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. Fast forward/Fast reverse 18 Notes: " Track up/track down and fast forward/fast reverse are possible only within one disc. " When the end of the last track is reached during fast forward, " END" will appear on the display and disc operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. ( : Last track number) " CD sound is heard during fast forward/fast reverse, except for CD-R/ RW in the MP3 or WMA format. To change the display (CD-R/RW discs recorded in the MP3 or WMA format only) While in the stop mode or playback mode, press the DISPLAY button. [When in the stop mode] XL-MP60 Total number of tracks Folder name !To select the desired folder or track by name (CD-R/RW discs recorded in the MP3 or WMA format only) Track name [When in the playback mode] 1 While in the stop mode, press the DISPLAY button on the remote control to display the folder name. Select the desired folder by pressing the Press the DISPLAY button to display the track name. or button. 2 3 4 5 Elapsed Track number playback time Folder name Track name Album name Select the desired track by pressing the Press the playback. / button to begin or button. Artist name Title name 19 Disc Playback XL-MP60 Advanced disc playback (continued) !To play from a specified disc You can start playback from the desired disc by selecting the number. !Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track while playing the selected disc. Selected track number " The direct search buttons allow you to select up to number 9. 2 Press the "3" button. 1 Press one of the 1- 5 buttons to select the desired disc. Selected disc number Disc Playback 2 Press the / button. " Playback will begin from track 1 on the chosen disc. " After the last track on the fifth disc is played, the CD player stops automatically. Note: If a disc tray with no disc is selected, playback will not start and the disc indicator will go out. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed while the disc is stopped, press the / button to start the desired track on the current disc. [. . . ] There may be some deviations from these values in individual units. XL-MP60 !General Power source AC 120 V, 60 Hz Power consumption 121 W Dimensions Width: 6-5/16" (160 mm) Height: 9-7/16" (240mm) Depth: 12-9/16" (319mm) Weight 11. 5 lbs. Front speaker Type 2-way type speaker system (magnetic shield) 1. 5" (4 cm) tweeter 4" (10 cm) woofer 75 W 37. 5 W 6 ohms Width: 6-1/2" (165 mm) Height: 9-7/16" (240 mm) Depth: 8-3/16" (208 mm) 4. 9 lbs. (2. 2 kg)/each Output power Output terminals Front speakers: 37. 5 watts minimum RMS per channel into 6 ohms from 100 Hz to 20 kHz, 10% total harmonic distortion Subwoofer: 45 watts minimum RMS into 6 ohms from 70 Hz to 130 Hz, 10% total harmonic distortion Front speakers and subwoofer: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 k ohms Dimensions Weight ! [. . . ]